NEW!
Oxidation Remover

Oxidation Remover

$189.00

is safe to remove industrial and air pollution from your masonry building.  Finally, an environmentally conscious,  low odor/VOC’s and biodegradable cleaner that works! 

Description

Cathedral Stone’s Oxidation Remover safely removes the black “soot” on masonry buildings, chimneys, and tunnels. Oxygen combining with fuel leaves a black “film” behind.  Buildings near highways, industrial centers, and tunnels will often have this unsightly black layer. The Oxidation Remover is water based, biodegradable, non-flammable, with a very low odor and an easy water clean up.

Always prepare a test area prior to full application. This will indicate the time required for project completion and suitability of the product for the substrate. Cover/Protect areas where overspray is possible. Cover or wash plants before and during application. Apply a thick even layer onto a thoroughly wet substrate. Dwell times vary with the temperature. The lower the temperature the longer the dwell time but a minimum of 15 minutes is required. If remover starts to dry, reapply a light coating and allow extra time for completion. Remove with a warm water spray. When rinsing, always work from the bottom to the top. See product data sheet. 

A 5 Gallon Bucket typically covers 500 ft².

Read and follow all manufacturer’s Instructions

Do not allow product to freeze. Do not use in freezing temperatures. We cannot ship this in freezing temperatures. 

Made in the USA! 

Pallets are available. 

Freight Orders: If you have 1-2 weeks before you need your order, we can put the order out to bid. This option can offer significant freight savings.  Allow 1 week for transit time. Please call to discuss. 

Data/Installation Instructions

Guidelines for Product Specifications

MSDS

Additional information

Weight 36 lbs
Dimensions 11 × 11 × 15 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

TOP