$48.00
Natural Adhesive provides a strong and lasting bond between a variety of masonry substrates. Designed to reattach broken, loose or spalled stone. This product is water based, user safe, and environmentally friendly. No solvents for clean up! Surface preparation is must for proper adhesion (see Product Data Sheet). Easy wet to wet application! Do not allow the surfaces to dry out before applying Natural Adhesive. Coat one of the substrates and use a clamp or other means to ensure contact is not broken. Do not disturb the repair until curing is complete (usually 24 hours). Clean Up at the time of the repair. Remove any uncured mortar from the perimeter of the repair before it dries using clean water and a sponge. Repeat several times to avoid a “halo effect”. Ambient temperature range for application should be between 40°-90°F with low to average humidity. Protect from extreme heat, freezing, excessive wind, rain and direct sunlight.
As always, we recommend a mock-up!
Made in the USA!
Data/Installation Instructions
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Amount | 1 Quart |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.